DC Electromagnet: Holding Force from a Coil and Core
DC electromagnet — A DC design avoids the eddy-current and humming issues of AC coils, but residual magnetism and release time must still be engineered into the armature face.
Cixin Electromagnetic Technology (Cixin Industrial) has been manufacturing electromagnets, solenoids and solenoid valves since 2011 from Qingxi Town, Dongguan, Guangdong Province. The company focuses on rotating electromagnets, self-holding electromagnets, miniature solenoid valves and miniature solenoid pumps, and works on an OEM/ODM basis for equipment manufacturers.
Technical definition and how it works
A DC electromagnet converts electrical energy into a controlled mechanical action using a coil and a ferrous magnetic circuit. With a DC supply the magnetic field is steady, so there is no AC hum and no need for a shading ring. Unlike a motor, it produces a short, direct stroke (or a holding force) with no gearbox, which is why it is chosen where the mechanism needs a fast, repeatable, low-part-count action. The design variables are the coil, the air gap, the return mechanism and the permitted duty cycle.
Engineering notes for DC electromagnet
Verify the release behaviour with the real armature. A clean, flat, unplated face can stick after a long hold, so anti-residual features are part of the design.
What we need to specify your DC electromagnet
These are inputs a buyer supplies – they are not product claims. Send them with your assembly drawing or 3D file and our engineers will return a proposal and a sample plan.
| Input | Why it matters |
|---|---|
| Required action: pull, push, hold or rotate | Selects the family before sizing. |
| Force / holding force and working stroke | Quoted at the working air gap in the real assembly. |
| Supply voltage, available current and duty cycle | Sets coil resistance and thermal design. |
| Mounting, plunger interface and connector | Needed for the assembly drawing. |
| Environment: temperature, moisture, ingress protection | Sets potting, plating and sealing. |
| Target service life and acceptance test | Defines the validation plan for samples. |
Typical applications
- intelligent locks, lockers and access control
- home appliances, printers and office equipment
- medical and laboratory devices
- EV charging and industrial automation
- textile machinery and vending equipment
Customisation, tooling and quality
Our 3,000 m²+ workshop covers tooling, 3D forming, plastic injection and inspection, supported by 200+ staff across R&D, management and quality. Every unit is tested before dispatch (100% QA). For new customer products, our engineers join the development process from the concept stage to shorten design time and improve reliability. Stroke, force, coil voltage, duty cycle, connector, lead length and mounting can be adapted to the assembly.
Related reading on cx-solenoid.com
- How do electromagnetic solenoids work?
- Electromagnets and their applications
- Custom solenoid development process
- Some Schemes To Improve The Performance Of Electromagnet
Frequently asked questions
What is the difference between a solenoid and an electromagnet?
An electromagnet generally produces a holding force on a ferrous surface with no moving plunger; a solenoid uses a moving plunger to create stroke. Both use the same coil-and-core principle, and our working-principle article explains the magnetic circuit.
Can a DC electromagnet be customised for our voltage and envelope?
Yes. Coil voltage, stroke, force, duty cycle, connector and mounting are all part of the OEM/ODM scope.
What do you need to quote a custom part?
The six inputs in the specification table above, plus the assembly drawing or 3D file and the expected annual volume. Our development-process article walks through the steps from specification to sample.
Request a quote or an engineering review
Send the specification inputs above with your drawing, target volume and destination market. Talk to our engineering team or contact Cixin Industrial for a proposal and sample plan.
Engineering datasheet and samples
Measured force-stroke curves, coil resistance, temperature rise and cycle-life results are issued against the approved drawing for each project. Request the current datasheet, tolerance drawing and sample plan for your application when you send the specification inputs above.