Long Stroke Tubular Solenoid | OEM Linear Actuator

Long Stroke Tubular Solenoid: Trading Force for Travel

Long stroke tubular solenoid — Force drops sharply as the air gap grows, so a long-stroke design is usually limited by the force available at the END of travel rather than at the start.

Cixin Electromagnetic Technology (Cixin Industrial) has been manufacturing electromagnets, solenoids and solenoid valves since 2011 from Qingxi Town, Dongguan, Guangdong Province. The company focuses on rotating electromagnets, self-holding electromagnets, miniature solenoid valves and miniature solenoid pumps, and works on an OEM/ODM basis for equipment manufacturers.

Technical definition and how it works

In a long stroke tubular solenoid, the mechanical envelope is the primary constraint. A longer stroke increases the working air gap, and force falls non-linearly as that gap grows. Force, stroke and thermal capacity all scale with the volume of the coil and the magnetic circuit, so a smaller body trades continuous force and heat dissipation for package size. The practical design sequence is to fix the available space and mounting first, then size force and duty cycle within it.

Engineering notes for long stroke tubular solenoid

Plot force across the whole travel, not just at the start. The usable force is the value at the end of the stroke, and long-stroke tubular units are usually limited there.

What we need to specify your long stroke tubular solenoid

These are inputs a buyer supplies – they are not product claims. Send them with your assembly drawing or 3D file and our engineers will return a proposal and a sample plan.

Input Why it matters
Available envelope (L x W x H) and mounting centres The hard limit; share the assembly drawing or 3D file.
Force at the working stroke Always quoted at the working air gap, not at zero stroke.
Stroke and permissible side load Determines plunger guidance and bearing life.
Duty cycle and ambient temperature Small coils have less thermal mass and heat faster.
Noise and impact limits at end of travel Drives the need for damping, cushioning or a soft-start drive.
Connector, lead exit direction and IP rating Often the reason a standard part cannot be dropped into a compact assembly.

Typical applications

  • smart locks, drawer and cabinet latches
  • compact medical and handheld devices
  • printers, scanners and office automation
  • wearable and portable consumer equipment
  • space-constrained industrial actuators

Customisation, tooling and quality

Our 3,000 m²+ workshop covers tooling, 3D forming, plastic injection and inspection, supported by 200+ staff across R&D, management and quality. Every unit is tested before dispatch (100% QA). For new customer products, our engineers join the development process from the concept stage to shorten design time and improve reliability. Stroke, force, coil voltage, duty cycle, connector, lead length and mounting can be adapted to the assembly.

Related reading on cx-solenoid.com

Frequently asked questions

How much force can a long stroke tubular solenoid deliver?

Force depends on coil volume, stroke and duty cycle rather than on the name of the frame size. Give us the required force at the working stroke plus the on-time, and we will confirm the achievable envelope before tooling.

Will a smaller solenoid run hotter?

Generally yes: less copper and less surface area mean higher temperature rise for the same duty. This is why duty cycle must be fixed before the package is frozen.

Can you adapt a standard frame to our mounting?

Yes. Mounting centres, bracket geometry, plunger tip, connector and lead length are all within the OEM/ODM scope.

Request a quote or an engineering review

Send the specification inputs above with your drawing, target volume and destination market. Talk to our engineering team or contact Cixin Industrial for a proposal and sample plan.

Engineering datasheet and samples

Measured force-stroke curves, coil resistance, temperature rise and cycle-life results are issued against the approved drawing for each project. Request the current datasheet, tolerance drawing and sample plan for your application when you send the specification inputs above.

Need Help?

I’m Here To Assist You

Something isn’t Clear?
Feel free to contact me, and I will be more than happy to answer all of your questions.