Solenoid Pump | Miniature Metering Pump

Solenoid Pump: Reciprocating Metering with a Coil

Solenoid pump — Miniature solenoid pumps are one of Cixin Industrial’s specialist lines; the coil drives a reciprocating plunger, so dose per stroke and drive frequency set the flow rate together.

Cixin Electromagnetic Technology (Cixin Industrial) has been manufacturing electromagnets, solenoids and solenoid valves since 2011 from Qingxi Town, Dongguan, Guangdong Province. The company focuses on rotating electromagnets, self-holding electromagnets, miniature solenoid valves and miniature solenoid pumps, and works on an OEM/ODM basis for equipment manufacturers.

Technical definition and how it works

A solenoid pump converts electrical energy into a controlled mechanical action using a coil and a ferrous magnetic circuit. A solenoid pump is a reciprocating device: flow is set by the displaced volume per stroke multiplied by the drive frequency. Unlike a motor, it produces a short, direct stroke (or a holding force) with no gearbox, which is why it is chosen where the mechanism needs a fast, repeatable, low-part-count action. The design variables are the coil, the air gap, the return mechanism and the permitted duty cycle.

Engineering notes for solenoid pump

Flow is displaced volume per stroke times drive frequency, so the dose tolerance depends on both the plunger geometry and the stability of the drive signal.

What we need to specify your solenoid pump

These are inputs a buyer supplies – they are not product claims. Send them with your assembly drawing or 3D file and our engineers will return a proposal and a sample plan.

Input Why it matters
Required action: pull, push, hold or rotate Selects the family before sizing.
Force / holding force and working stroke Quoted at the working air gap in the real assembly.
Supply voltage, available current and duty cycle Sets coil resistance and thermal design.
Mounting, plunger interface and connector Needed for the assembly drawing.
Environment: temperature, moisture, ingress protection Sets potting, plating and sealing.
Target service life and acceptance test Defines the validation plan for samples.

Typical applications

  • intelligent locks, lockers and access control
  • home appliances, printers and office equipment
  • medical and laboratory devices
  • EV charging and industrial automation
  • textile machinery and vending equipment

Customisation, tooling and quality

Our 3,000 m²+ workshop covers tooling, 3D forming, plastic injection and inspection, supported by 200+ staff across R&D, management and quality. Every unit is tested before dispatch (100% QA). For new customer products, our engineers join the development process from the concept stage to shorten design time and improve reliability. Stroke, force, coil voltage, duty cycle, connector, lead length and mounting can be adapted to the assembly.

Related reading on cx-solenoid.com

Frequently asked questions

What is the difference between a solenoid and an electromagnet?

An electromagnet generally produces a holding force on a ferrous surface with no moving plunger; a solenoid uses a moving plunger to create stroke. Both use the same coil-and-core principle, and our working-principle article explains the magnetic circuit.

Can a solenoid pump be customised for our voltage and envelope?

Yes. Coil voltage, stroke, force, duty cycle, connector and mounting are all part of the OEM/ODM scope.

What do you need to quote a custom part?

The six inputs in the specification table above, plus the assembly drawing or 3D file and the expected annual volume. Our development-process article walks through the steps from specification to sample.

Request a quote or an engineering review

Send the specification inputs above with your drawing, target volume and destination market. Talk to our engineering team or contact Cixin Industrial for a proposal and sample plan.

Engineering datasheet and samples

Measured force-stroke curves, coil resistance, temperature rise and cycle-life results are issued against the approved drawing for each project. Request the current datasheet, tolerance drawing and sample plan for your application when you send the specification inputs above.

Need Help?

I’m Here To Assist You

Something isn’t Clear?
Feel free to contact me, and I will be more than happy to answer all of your questions.