12V Solenoid Door Lock | Cabinet & Smart Lock Actuator

12V Solenoid Door Lock: Fail-Safe Latching for Cabinets

12V solenoid door lock — For a lock, the de-energised state is a safety decision: the design must be clear about whether power loss releases or keeps the bolt in place before any coil is sized.

Cixin Electromagnetic Technology (Cixin Industrial) has been manufacturing electromagnets, solenoids and solenoid valves since 2011 from Qingxi Town, Dongguan, Guangdong Province. The company focuses on rotating electromagnets, self-holding electromagnets, miniature solenoid valves and miniature solenoid pumps, and works on an OEM/ODM basis for equipment manufacturers.

Technical definition and how it works

A 12V solenoid door lock is a DC linear actuator wound for a 12 V nominal supply. Energising the coil moves a ferrous plunger through a defined stroke; a spring, gravity or a permanent magnet returns it when power is removed. The 12 V rating sets coil resistance and inrush current – it does not by itself set the force. On a solenoid latch / door-lock actuator, force is a function of the coil, the magnetic circuit, the working air gap and how long the coil may stay energised.

Engineering notes for 12V solenoid door lock

A lock actuator should be specified with a manual release path and a defined state on power loss. Electrical force alone does not cover a jammed bolt or a misaligned strike.

What we need to specify your 12V solenoid door lock

These are inputs a buyer supplies – they are not product claims. Send them with your assembly drawing or 3D file and our engineers will return a proposal and a sample plan.

Input Why it matters
Nominal supply voltage and tolerance Confirms the coil winding and the driver / MOSFET or relay rating.
Force required at the working stroke Force falls as stroke increases; always specify force AT the working position, not at zero stroke.
Working stroke and end position Determines the plunger geometry and the return mechanism.
Duty cycle and maximum continuous on-time The single most common cause of coil overheating and field failure.
Ambient temperature and enclosure / IP requirement Drives insulation class, potting and sealing choices.
Mounting orientation, connector and lead length Needed for the drawing, the harness and the assembly fixture.
Required service life in cycles Sets the plunger finish, bearing and spring specification.

Typical applications

  • smart locks, cabinet locks and parcel locker latches
  • home appliances and vending / dispensing mechanisms
  • printers, copiers and office automation equipment
  • medical and laboratory devices
  • EV charging and industrial automation equipment

Customisation, tooling and quality

Our 3,000 m²+ workshop covers tooling, 3D forming, plastic injection and inspection, supported by 200+ staff across R&D, management and quality. Every unit is tested before dispatch (100% QA). For new customer products, our engineers join the development process from the concept stage to shorten design time and improve reliability. Stroke, force, coil voltage, duty cycle, connector, lead length and mounting can be adapted to the assembly.

Related reading on cx-solenoid.com

Frequently asked questions

Can a 12 V coil be energised continuously?

Only if the duty cycle is specified for continuous operation. Continuous energising of a coil designed for intermittent duty raises winding temperature and reduces force and life. State your on-time and off-time when requesting a quote, and we will size the coil accordingly.

What changes if my supply is not exactly 12 V?

Coil resistance is designed around a nominal voltage. Under-voltage reduces available force; over-voltage increases current and heating. Tell us the real tolerance of your supply (including battery or capacitor discharge curves) so we can wind for the actual range.

Can I get samples to validate a 12V solenoid door lock in my assembly?

Yes – samples are normally used to verify force-stroke behaviour, temperature rise and cycle life in the real fixture. Our sample testing checklist explains what to record during the trial.

Can the connector, mounting and lead length be customised?

Yes. These are part of the standard OEM/ODM scope, together with stroke, force, coil voltage and duty cycle. Send the assembly drawing or a 3D file with your enquiry.

Request a quote or an engineering review

Send the specification inputs above with your drawing, target volume and destination market. Talk to our engineering team or contact Cixin Industrial for a proposal and sample plan.

Engineering datasheet and samples

Measured force-stroke curves, coil resistance, temperature rise and cycle-life results are issued against the approved drawing for each project. Request the current datasheet, tolerance drawing and sample plan for your application when you send the specification inputs above.

Need Help?

I’m Here To Assist You

Something isn’t Clear?
Feel free to contact me, and I will be more than happy to answer all of your questions.